Skip to content

IoT and telematics

Vehicle telematics and fleet management

Which device sits in which vehicle, where has it been, and what does the SIM card cost? The answers sit in the vehicle file.

In short

Vehicle telematics from Beyonetix is the management of trackers, positions, trips and SIM cards in the ERP, meant for fleets and rental firms. It is in use in a vehicle fleet.

Updated: November 2026

Managing devices and vehicles

Each device has a unique identifier and a state: in stock, active, in the workshop, defective or on its way back. You see at a glance how many trackers are ready for use.

The assignment to a vehicle carries a history. If you swap a device, it stays traceable which device sat in which vehicle and when. Trips and positions stay with the vehicle.

Each device gets a QR label with a permanent short link. The target of the link can be changed later, and the label on the device stays valid. Commands to the device come from a maintained catalogue instead of a free input field, and the system estimates the cost before execution.

Positions and trips

The vehicle file shows the last known position. One click opens the large map. There you choose a period and see the list of trips and the routes drawn in.

What the vehicle file shows from telematics
ItemWhat you see
PositionLast known location in the vehicle file
TripsEvery trip with its route on the map
Idle timesEvery idle period with place and duration
Odometer readingIn the standard field of the vehicle file
AlarmsTask on the vehicle and email to those responsible

An alarm creates a task on the vehicle that someone has to close, and an email to those responsible.

SIM cards and data usage

In a larger fleet, mobile data costs add up quickly. That is why the system manages the SIM cards with status, included volume and purchase price.

It measures usage itself, per day and per card, and places the carrier's figure beside it. The deviation appears in a field of its own. You see whether an invoice matches your devices before you pay it.

How the system checks data usage
ItemContent
StatusState of the SIM card
Included volumeData volume included per card
Own measurementUsage per day, counted by the system
Carrier figurePlaced beside it for comparison
DeviationField of its own with the difference

Billing through central management

We keep devices and SIM cards in one central management system. The customer systems show only the vehicle view, that is, map, trips and alarms of their own vehicles.

Billing follows a simple model: a base price per device and month with included volume, extra usage itemised, and a handover to the subscriptions per customer. The values are settings. We agree with you which prices apply.

Connection to the ERP

Telematics does not run as a separate system. It writes into the fields the ERP already knows. The odometer reading sits in the standard field of the vehicle file, and maintenance planning, inspection dates and rental billing read it without extra logic.

For rental firms, the handover completes the picture. At return the handover app sets mileage and fuel level and moves the rental contract to the right state. You find more on the page about vehicle businesses and on the apps page.

How setup works

From the box of trackers to the first monthly bill you go through these steps.

  1. Record the device. You create the device with its identifier and print the QR label.
  2. Assign the vehicle. You assign the device to the vehicle. From then on the history is recorded.
  3. Install and test. The device is installed and put into operation. The guided installation check is available on request.
  4. Receive data. Position, trips and odometer reading appear in the vehicle.
  5. Handle alarms. An alarm creates a task on the vehicle and sends an email to those responsible.
  6. Bill the month. Daily usage flows into the monthly billing.

Limits

Not every device fits. Our receiving service understands the raw data of common vehicle trackers, and for a model we do not know yet we check first.

The guided installation check and commissioning are built but not yet part of daily operation. We set them up on request.

Machines and installations call for different planning. It runs as a project in each case and is described on the IoT and telematics page.

Questions and answers

Questions about vehicle telematics

Which devices are supported?

Our receiving service accepts the raw data of common vehicle trackers over a network connection. We work out which models fit your fleet in a conversation before you buy anything.

How do I check the data usage of the SIM cards?

The system stores usage per SIM and day from its own measurement and places the carrier's figure next to it. If the two differ, the difference appears in a field of its own.

How does this connect to rental?

The odometer reading lands in the standard field of the vehicle file. Rental billing, maintenance planning and inspection dates read it from there. At return, the handover app writes the mileage into the same standard field, records fuel level and return date and brings the rental contract into the matching state.

What does operation cost?

That depends on scope, for example the number of vehicles and what you want to bill. You receive a quote after the first conversation.

Read on

How big is your fleet?

Tell us your vehicles and trackers. We tell you what can be connected.